LG T500 Successfully Flashing Done With GSMULTI V3.0

Here Gide About Flashing .
Infineon flashing on USB
1. Install GSMULti V30
2. Connect phone to usb cable without battery, Windows will ask for driver, show driver from C:\GSMULTI\UsbDrivers\INFINEON.
3. Open USBMap from C:\GSMULTI, select INFINEON and click MAPPING START, reconnect the phone to usb cable without battery. Some info will show on PORT/KEYNAME, now SAVE & EXIT.

Here Image About Step 3

 

4. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK. Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable. If flashing not start without battery just put the battery and slightly press power button.

Some new phones are from Infineon AGold plafrom, you need to install USB PortMapping Setup_1.7. Run USBMap_V07 from C:\GSMULTI, select INFINEON AGold Series and do mapping, rest of the procedure is same.


Here Flasher (GSMULTI V3.0)
gsmulti v3.0.rar - 4shared.com - online file sharing and storage - download

Here File & Gide
Here Start Flashing.
 

Here Flashing Done .


Here Phone Now Working .

LG GW300 (Restart-Done) Successfully Flashing Done With GSMULTI V3.0

LG GW300 (Restart-Done) Successfully Flashing Done With GSMULTI V3.0

NOTE - If After Install Usb Driver Auto disconnect To pc . you Can Solved This Way
Here Gide About Flashing .
GIDE-flashing on USB-GIDE
1. Install GSMULti V30
2. Connect phone to usb cable without battery, Windows will ask for driver, show driver from C:\GSMULTI\UsbDrivers\MTK.
3. Open USBMap from C:\GSMULTI, select MTK and click MAPPING START, reconnect the phone to usb cable without battery. Some info will show on PORT/KEYNAME, now SAVE & EXIT.
4. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK. Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable. If flashing not start without battery just put the battery and slightly press power button.

---GIDE---
------------------
!!!---Flowing The Screenshot One By One---!!!

Usb Save Screenshot

Driver Install Done



GSMULTI Setting Screenshot



Flash Starting Screenshot

Flash done Screenshot

[TUTORIAL] LG A140 Flashing

Since LG A140 is a Sagem based phone, SMT Sagem software is needed to download S/W.

Flashing Procedure:
1. Download SMT_Sagem_software_20110616.zip and extract.
2. Donwload SMT_1.1.0.1.zip and extract.
3. Download firmware(links are at the end of this post), extract and copy all the files to SMT_Sagem_software_20101117 folder.
4. Install USB driver from SMT_1.1.0.1\Tools folder (you may need to connect the phone to complete installation).
5. Run LGE_SMT_U38TM.exe from SMT_1.1.0.1 folder, you'll get the settings winndow, select SMT_Sagem_software_20101117 folder in Master Directory, click OK.
6. Now main window wil open, connect the phone to usb cable and click detect, it will write Connection OK if detection is successfull.
7. Click Download.

For more instructions and how to force download read manual from SMT_1.1.0.1\User_Guide\User_guide_SMT_LGE_v1 1 0 1.ppt

Firmwares:
LGA140
GERMANY EWN_NE_Open_DE.zip
O2 UK E2N_NF_O2_UK.zip
ORANGE ROMANIA ERN-00-NJ_SMT.zip
ROMANIA EEN_NB_Open_Romania_SMT.zip
T-MOBILE CROATIA EHN-00-NJ_SMT.zip
TESCO UK EKN_NF_Tesco_UK_SMT.zip

LGA140GO
T-MOBILE UK EUN-00-NK_SMT.zip
T-MOBILE GERMANY ETN-00-NJ_SMT.zip

LG Flashing/Upgrading/Debranding Tutorial

LG has both GSM and CDMA phones. Here I'll discuss on how to Flash/Software Update/Debrand LG GSM phones. Flashing depends on Platform rather than Model, so you may notice one model uses one flasher but the next model uses another. Different models which are from same platform use same flasher. LG has several platforms like Infineon, Qualcomm, ADI, TI, MTK, SEMC etc. I'll try describe on each platform how to flash a phone. Remember that, till now Windows XP is the best performing Operating Syetem for LG flashing.

~INFINEON~

Phones based on Infineon platform are flashed with GSMulti software. GSMulti has different versions like 20, 21, 30. The last one is GSMulti V30 and it supports all infineon phones till now. Infineon phones can be flashed both in USB and UART mode. Normally USB should be used, it will flash the phone in minutes where UART will take hour(s). Sometimes when phone is dead or rebooting and can't install USB driver you need to use UART then. Some old phones support only UART.
Infineon flashing on UART 1. You need a USB to Serial Converter BOX/Cable with correct pinout of the phone. 2. Install and run GSMulti v30 3. Go to Setting(s) > Configuration, select DLL and firmware on S/W box, select UART as communication, select correct port of Box/cable, then click OK. 4. Now click START on main window, when the software says Wait Phone Connecting... connect POWERED OFF phone with battery to cable and press POWER button.
Infineon flashing on USB 1. Install GSMULti V30 2. Connect phone to usb cable without battery, Windows will ask for driver, show driver from C:\GSMULTI\UsbDrivers\INFINEON. 3. Open USBMap from C:\GSMULTI, select INFINEON and click MAPPING START, reconnect the phone to usb cable without battery. Some info will show on PORT/KEYNAME, now SAVE & EXIT. 4. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK. Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable. If flashing not start without battery just put the battery and slightly press power button.
Some new phones are from Infineon AGold plafrom, you need to install USB PortMapping Setup_1.7. Run USBMap_V07 from C:\GSMULTI, select INFINEON AGold Series and do mapping, rest of the procedure is same.

~Qualcomm~

Phones based on Qualcomm platform are flashed with LGMDP, LGDP1, LGDP2 etc. Several updates came for these flashers.You need the USB cable, UART flashing not supported for this platform.
Flashing with LGMDP 1. Install LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3. 8.1.rar, connect the phone to PC through USB cable and let the drivers to be installed. 2. Opne LGMDP soft, click on the Select Port, new window will pop up.Your phone model and firmware version will be showed up there, if the phone is supported with that LGMDP version it will be automatically ticked on the checkbox. Now click Connect. 3. A new window will pop up for firmware selection. Browse and select your firmware folder in the Select Image box, all files will be automatically selected. You can change any certain file from the browse button. If you are using a DZ firmware click DZ button on the right lower corner of the window and and select that. 4. Select data handling option: NV Backup/Restore: NV Backup/Restore always have to be done, and it is default selected option. Backup the NV data and restore the backed up NV data automatically. Reset database & Contents: User related data including the setting data on the EFS is reset in the handset. The contents in the handset will be erased. Erase_EFS: The calibration data, user contents, media, and module will be erased. Only calibration data is kept when NV backup/restore is checked. Keep All Contents: No user data will be erased. 5. Now click Start and relax.
Emergency Download Mode: Qualcomm phones support a special mode named emergency download mode. In this mode, minimum units for downloading is occured so that users can download the images again in case of emergency situation. AMSS Modem, Media and Module Images won't be flashed in this mode. You may need it when the phones not power on normally/incrorrectly flashed earlier etc.
Flashing with LGDP2 1. Downlaod LGDP2 V36 UMTS Setup_Release 20091101.zip and extract, go to LGDP2_31_INCLUDE_LGDP1_Setup folder and install the exe (use serial number). Now copy all the files from DOWNLOAD folder and paste on C:\DOWNLOAD (overwrite if needed). 2. Install LG United Modem Driver, connect the phone to PC through USB cable and let the drivers to be installed. 3. You'll need firmware in DZ format and the correct DLL for your model. 4. Open LGDP2_V36_UMTS (for example) from C:\DOWNLOAD, select UMTS in Division and click OK. 5. Select port (check Device Manager for LG USBModem Port number), you can set a range from easy select or select manually. Select DLL and select firmware in Downlaod Configuration. Click OK. 6. Click START in main window and connect the phone in Emergency download mode.

~ADI~

ADI phones are flashed with GSMulti. Can be flashed both in USB and UART mode, old phone only support UART.
ADI flashing on UART 1. Install and run GSMulti v30 2. Go to Setting(s) > Configuration, select DLL and firmware on S/W box, select UART as communication, select correct port of Box/cable, then click OK. 3. Now click START on main window, when the software says Wait Phone Connecting... connect POWERED OFF phone with battery to cable and press POWER button.

ADI flashing on USB 1. Install GSMULti V30 2. Install MTK Download Setting. 3. Connect POWERED OFF phone to usb cable, Windows will ask for driver, show driver from C:\GSMULTI\UsbDrivers\MTK. 4. Open USBMap from C:\GSMULTI, select MTK(ADI) and click MAPPING START, reconnect the phone to USB cable (re-insert battery also). Some info will show on PORT/KEYNAME, now SAVE & EXIT. 5. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK. Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable.Press POWER but if not start automatically.

~MTK~

MTK based phones are flashed with Leo Tool. You need COM box/cable to flash, USB not supported.

Flashing Procedure
1. Download and Install Leo Tool.
2. Open Leo Downlaod Tool, select correct COM port for your BOX/cable.
3. Click Setting and select firmware in pcs format, software will show waiting, connect phone to BOX/cable and press POWER button, keep pressed till the download agent is finished.
4. Release POWER button and let Leo Tool do the rest.

~TI~

TI phones are also flashed with GSMulti.

TI flashing on UART
1. Install and run GSMulti v30
2. Go to Setting(s) > Configuration, select DLL and firmware on S/W box, select UART as communication, select correct port of Box/cable, then click OK.
3. Now click START on main window, when the software says Wait Phone Connecting... connect POWERED OFF phone with battery to cable and press POWER button.


TI flashing on USB
1. Install GSMULti V30
2. Install LGE_GSM_Device_Driver_OMAPV1030_1.0 from C:\GSMULTI\UsbDrivers\TI_NEPTUNE
2. Connect POWERED OFF phone to usb cable and install driver.
3. Open USBMap from C:\GSMULTI, select TI and click MAPPING START, reconnect the phone to USB cable (re-insert battery also). Some info will show on PORT/KEYNAME, now SAVE & EXIT.
4. Open GSMulti main software, go to Setting(s) > Configuration, select DLL and firmware on S/W box, select USB as communication then click OK. Now click START on main window, when the software says Wait Phone Connecting.. reconnect the cable.Press POWER but if not start automatically.

~SEMC (A2)~

Flashing Procedure
1. Downlaod LGDP2 V36 UMTS Setup_Release 20091101.zip and extract, go to LGDP2_31_INCLUDE_LGDP1_Setup folder and install the exe (use serial number). Now copy all the files from DOWNLOAD folder and paste on C:\DOWNLOAD (overwrite if needed). Copy meflash.dll from C:\DOWNLOAD\EMP_DL_USBDriver to C:\DOWNLOAD if not exist there.
2. Connect the phone in POWERED OFF/SPECIAL BOOT MODE (varies on different model) to usb cable and show driver from C:\DOWNLOAD\EMP_DL_USBDriver.
3. Open LGDP2_V34_UMTS_KF750 from C:\DOWNLOAD, select UMTS in Division and click OK.
5. Select DLL and click Run Download Configuration. Add .ssw files in LGE image box and .map files in LGE GDFS box. Click OK.
6. Click START in main window and reconnect the phone in POWERED OFF/SPECIAL BOOT MODE.

LG Android Firmwares Super Thread

LG Android Firmwares Super Thread

LG Nexus 4 (E960) E960

LG Venice (LG730) LG730

LG Optimus Regard (LW770) LW770

LG Spectrum II 4G (VS930) VS930

LG Mach (LS860) LS860

LG Optimus G LS970 LS970

LG Optimus L9 (P760/P769) P760 P769

LG Motion 4G (MS770) MS770

LG Optimus Plus (AS695) AS695

LG Optimus Plus (AS695) AS695

LG Optimus G (E970/E973) E970 E973

LG Intuition (VS950) VS950

LG Splendor (US730) US730

LG Escape (P870) P870

LG Optimus M+ (MS695) MS695

LG Optimus Elite (LS696) LS696

LG Optimus L5 Dual (E615/E615f) E615

LG Connect 4G (MS840) MS840

LG Viper (LS840) LS840

LG Lucid (VS840) VS840

LG Optimus Vu (P895) P895

LG Optimus L3 (E405) E405

LG Optimus True HD LTE (P936) P936

LG Spectrum (VS920) VS920

LG Esteem (MS910) MS910

LG Optimus V (VM670) VM670

LG Optimus C (LW690) LW690

LG Optimus 4X HD (P880) P880

Optimus 3D Max (P720/P725) P720 P725

LG Marquee (LG855/LS855) LG855 LS855

LG Optimus L7 (P700/705/708) P700 P705 P708

LG G2X (P999) P999

LG Phoenix (P505) P505

LG Enlighten (VS700) VS700

LG myTouch Q (LGC800DG) C800

LG Optimus L5 (E610) E610

LG Optimus 2 (AS680) AS680

LG Optimus U (US670) US670

LG Optimus Zip (L75C) L75c

LG Optimus L3 (E400) E400

LG Optimus M (MS690) MS690

LG Thrive (P506) P506

LG Nitro HD (P930) P930

LG Axis (AS740) AS740

LG Ignite (AS855) AS855

LG Optimus 4G LTE (P935) P935

LG Optimus Q (L55C) L55C

LG DoublePlay Flip II (C729) C729

LG Optimus Sol (E730) E730

LG Apex (US740) US740

LG Optimus Hub (E510) E510

LG P R A D A 3 (P940) P940

LG Vortex (VS660) VS660

LG Optimus Black (P970) P970

LG Optimus Pro (C660) C660

LG Optimus Thrill 4G (P925) P925

LG myTouch (LGE739BK) E739

LG Optimus Slider (VM701) VM701

LG Optimus 3D (P920) P920

LG Optimus Pad (V900/L-06C)

LG Optimus Me (P350) P350

LG Optimus 2X (P990) P990

LG Optimus Chic (E720) E720

LG Optimus Net (P690) P690

LG Optimus One (P500/P504) P500 P504