Samsung T889 Firmware Update Steps
- Make sure of the charging level of your phone's battery (90% at least).
- Turn the phone off.
- Take out its battery, SIM card, And memory card.
- From Odin flasher folder run Odin.exe
- Leave the checked options as they are (Auto Reboot, F.Reset Time).
- Click on PDA button to select the firmware file from its extracted folder:
KIES_HOME_T889UVBMB4_T889TMBBMB4_935627_REV04_user_low_ship.tar.md5
(The above file name and version is an example only)
- Put the phone into Download Mode:
Press and Hold Volume Down key + Home key, Then press Power key until you get the warning message on screen. Release all keys and press Volume Up key to be in Download Mode.
- Connect the USB cable to your phone and PC.
- If Odin program detects the phone, You will see its COM port number 0:[COMxx]
- Now you are ready for updating your Samsung T889, Just click on Start button.
- Odin flasher will start installing the firmware files into your Galaxy Note II.
- Your phone will be rebooted after finishing the update process.
- Look at Odin's window and if you see the word PASS!, Then the update was successful.
- Disconnect your Samsung T889 from PC.
- Wait for your phone to be fully on.
- Check the new installed firmware version by this code *#1234#
- It is recommended to do a full reset to it using this code *2767*3855#
- After your phone reboots for the second time, You can start customizing it and enjoying your well done work.
Download Firmware
Download Flasher
0 comments:
Post a Comment